Rhinestone white tiger pattern Iron-on

Description

Product Details
Warm Tip:
1、All hot drills do not give off light, they will flash only under the light or sunlight. This baby has no clothes, only hot diamond pattern.
2、Due to different monitor and camera lights may cause
slight color differences, mainly in kind of all colors.
We guarantee that appearance,
entirely consistent with the picture.
3、Due to some fabrics, molten colloid cannot penetrate into the cloth, which will affect the viscosity of hot drilling.
Usage:
1. Tear off a layer of white substrate with lines under the hot drill pattern, then place the adhesive paper with the drill pattern on the clothes where you think it is appropriate, and press it down with your hands. [The sticky side is downward] If the drill is relatively large, or there are several kinds of drills or pieces of different sizes, you should turn the clothes upside down and iron them from the cloth side.
2. Turn the electric bucket to the highest temperature or the first gear of “cotton” [equivalent to 150-180 degrees], and then add water to the steam bucket to open the steam iron (steam will make the heating temperature even). Put the clothes on a flat operating surface. Sometimes, in order to iron more firmly, you can put one or two layers of towels on the operating surface. Press the iron firmly on the hot stamp for about ten seconds. If the hot stamp is large and the electric iron cannot cover it once, move the iron repeatedly on the hot stamp to make the whole hot stamp evenly heated. At the same time, the blanching time should be extended accordingly.
3. After ironing, it is necessary to tear off the adhesive tape on the surface after the hot drawing cools down, and then a beautiful DIY hot drill is completed.
Preparations: hot stamping, electric iron, thin towel if necessary, etc.
Hot stamping principle: There is special glue at the bottom of the hot drill. In case of high temperature, the glue at the bottom will melt and stick to objects, usually clothes.